Question: How do I mount the Connect SmartHome 3W Solar Panels?
Answer:
To mount the solar panels:
Mount the Base:
Use included screws to secure the base.
For soft surfaces, drill using a 6.0mm bit, insert a wall anchor, and screw the base in place.
Assemble the Panel:
Insert the locking screw cap into the universal joint.
Screw the circular socket nut into the joint.
Attach the joint to the solar panel back and tighten with the nut.
Attach to Mounting Base:
Fix the assembled joint and panel to the mounted base.
Ensure the universal joint is angled upward.
Connect the Cable:
Plug the USB-C cable into the camera’s port.
Ensure a weatherproof seal is maintained.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article