Question: How do I install the Smart Blind Opener on my blinds?
Answer:
Fully charge the battery using the USB-C cable.
Choose the correct blind adapter based on your cord.
Remove the top cover and attach adapter to the motor.
Loop the cord around the adapter without crossing sides.
Ensure the controller hangs straight.
Test movement using the Up/Down buttons.
Attach the controller with tape and press firmly.
If tape fails, mount bracket using screws and anchors.
Cut top cover clips to fit chain and replace cover.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article