Smart Deadbolt Lock with Apple Home Support: Installation Guide

Question: How do I install the Smart Deadbolt Lock with Apple Home Support?

Answer:

1. Install Deadbolt: Adjust for 60mm or 70mm backset. Make sure the “UP” label faces upward.

   1. 

2. Install Strike Plate: Use 25mm screws.

   1. 

3. Attach Exterior Assembly: Add spacer if hole is 38mm.

   1. 

4. Attach Interior Assembly:

   • Remove cover

   • Thread cables

   • Mount securely and connect wires

   • Tuck wires neatly into cavity

   • 

5. Install Batteries: Insert 8 × AA batteries of the same type (don’t mix old/new).

   1. 

6. Complete Setup: Use the LNDU app or manual pairing to finish.

   1.